Last weekend's adventure was
photographing the Supper Blood Moon. The day turned overcast where I
live, which is pretty unusual, but in the end of the evening it
cleared out sufficiently for us to see the moon.
I headed out to the field armed with my
tripod, my
55-200 mm zoom, and the remote trigger. I found a nice spot
in the corn fields and waited. Since this was going to be my very
first night picture outing, I started to test some settings
beforehand.
I first put the camera in manual
mode and took some shots. I quickly realized that this was not
going to work because the camera's computer exposes the scene to
render it... well lit. It was almost dark when I took the picture
below, the sun had already set, but the picture looks much brighter
(even so before post-processing). Note also that nothing is really in
focus since I focused on the geese rather than the buildings, but the
shutter speed was too slow to freeze movement.
When the moon showed up, I took my
first shot in aperture priority with
the ISO free to vary. This was following the advice of
a photographer on meetup, but I forgot the part of his advice that
said to use spot metering. Note that the scene is over exposed
(it was already darker than the in the picture above).
I then put the camera in manual mode,
limited the ISO to 800, and controlled the shutter speed until I saw,
in the LCD, the darkness I was seeing in the sky. The photo below,
significantly cropped and somewhat reduced, is one of my best
results, but there is a color fringe around the moon and considerable
noise. When processing the image from raw, I had to set the black
point, since the sky looked deep blue.





No comments:
Post a Comment